Gas Hot Water System

$100 off

Old Hot Water System Replacement

Call Now
*Conditions Apply

Gas Hot Water System

A gas hot water system is a water heating system that uses gas as the primary fuel. Traditional gas hot water systems haven't been as popular in Penrith as the basic electric tank, but that's starting to change as the gas infrastructure expands and contemporary designs are introduced with electronic ignition and continuous flow. Water heaters with features like touchpad temperature control have also emerged in the markets.

Because of their fast recovery rate or rapid heating, gas hot water systems are ideal for big households. In comparison to an electric water heater, they can heat a larger volume of water to a certain temperature. They have been shown to heat twice as quickly as an electric hot water heater system.

If you have access to natural gas, it is a viable alternative. Gas hot water systems can be less expensive than electricity (unless you have solar panels), and because gas costs do not fluctuate throughout the day, they can heat water as needed. Bottles of liquid petroleum gas (LPG) offers an alternative to natural gas but expects to spend much more on operating costs. If it's a straight replacement for a similar system, installation should take no more than two or three hours.

A tank of roughly 135–170L is required for a four-person household. Due to venting regulations, gas hot water systems are often built outside, although they may also be put within with the use of a flue. Some feature a pilot light that consumes a tiny quantity of gas regularly. Electric ignition is more cost-effective, but you risk losing your hot water supply in the event of a blackout.

Gas continuous flow and gas hot water storage tanks are the two major forms of this water heater.
Show more
Show less

Gas Continuous Flow

The water in an instantaneous or continuous flow hot water system is heated as it moves through the system. The system never runs out of hot water since the water is heated constantly.

Gas continuous flow hot water systems are similar to instantaneous hot water systems, except that they are powered by both gas and electricity, and they are typically more durable and have higher flow rates. The following are characteristics of continuous flow hot water systems:

  • For bigger homes or business installations, multiple units can be linked together.
  • There is never a shortage of hot water.
  • It is possible to install water-saving ring mains with pumps. This saves water as you wait for hot water to come out of the faucets.
  • Costs of supply and installation range from moderate to high.
  • Operating costs are low.
  • Internal and external applications are supported by systems.
  • Natural gas (NG) or LPG (Liquefied Petroleum Gas) are used in the units.
  • The electronic aspects of these devices require a power source to work.

Show more
Show less

Gas Hot Water Storage Tanks

Penrith Hot Water’s professionals offer a comprehensive selection of gas hot water systems for sale and installation. Both gas instantaneous and gas storage tank hot water heater systems are available in our gas water heater line, which is both innovative and extremely efficient.

  • Tanks range in size from 90 liters to 170 liters for home use, and bigger for commercial use.
  • Lowest cost of supplies and installation.
  • Low to moderate operating expenses.
  • The water is delivered at mains pressure, which is the highest available for conventional hot water systems.
  • Maintains the temperature of the water in the tank at or above 60°C.

The following are the main advantages of a gas hot water system:
Advantages

  • Rapid heating or high recovery rate
  • Provides hot water even if there is a power outage
  • Energy efficient
  • Emissions of greenhouse gases are reduced.
  • Low operating costs
  • Unlimited hot water

Show more
Show less

Send Message

Have any Questions?
Call us Today!

02 4705 5747

Email Us

Hot water systems Installation, Service, Repairs and Replacement

02 4705 5747